Wastewater sludge compressor, Filter Press
Sludge compressors are used to manage sludge in wastewater systems. Or filtration in the flour and sugar production process helps separate sediment from water. Working characteristics Relies on compressed air pressure Press the sediment mixed with water through a filter cloth. FILTER to separate the sediment from the water. make the water pass The FILTER PRESS has less sludge. After that, the amount of sludge contained in the sludge press will be collected for easy disposal. The sludge water will be pumped into the machine until it is full and then the dried sludge will be removed to size. of The machine depends on the size of the filter, with sizes ranging from 10 liters to 10,000 liters. The dryness of the sediment water is 25% - 70%, depending on the type and nature of the incoming sediment water.
Type of use: Waste treatment system, food industry such as making khanom jeen flour, sugar, etc.
The sludge compressor shall be designed to operate under the following conditions.
- Able to compress liquid sludge at a rate of not less than 10 cubic meters per working cycle. Achieve no less than 360 liters of dry sludge (Cake) per working cycle.
- Must support high operating pressure at a level of not less than 7 bars.
- The cross-sectional size of the filter plate (Filter Plate) is not less than 630 mm.
- Filtration surface area must not be less than 28 sq m.
- The size of the space inside the filter must be not less than 25 mm thick.
- Dry Cake Content that has been compressed must have a dryness of not less than 25 percent weight to weight (w/w).
CONTACT
Contact FormCompany Information
Design and install wastewater treatment / All types of pipe work / Repair service, construction, and improv
Conducting business in providing services Selling wastewater treatment equipment Install a wastewater treatment system Annual repair and maintenance of wastewater treatment systems as well as being a ...