Knowledge List
-
Preventing Short Circuits in Electronic Components Caused by Solder Ball Spatter | Protective Design for Automated Soldering Equipment Based on Past Defect Cases
In electronic component manufacturing processes, solder balls that scatter and adhere to circuits or ...
-
Unstable Dimensions When Cutting Litz Wire Ends | How Dedicated Jigs and Automation Prevent Lead Wire Crushing and Dimensional Overrun
In coil manufacturing operations in Thailand, quality control of Litz wire is one of the processes t ...
-
【Ultra-Thick Plate Cutting Defects】The Limits of Processing Conditions That Cannot Be Overcome by Equipment or Cutting Tips Alone
When problems such as rough cut surfaces, gouges or depressions, and adhesion of molten metal occur ...
-
【Overseas NC Cutting Machine Failures】Why You May Face Problems After Installation If You Do Not Check the Maintenance Support System for Troubleshooting
When installing a large NC cutting machine at an overseas factory, it is important to consider not o ...
-
【Miyake Classroom】What is the difference between powder coating and solvent-based coating? 6 key points from the field
「Powder Coating vs. Solvent Coating: Which Should You Choose?」 Similar to our previous discussion on ...
-
【Miyake Seminar】What are the differences between single-stage press and progressive die press? 6 criteria for their selection on the production floor.
「Single-shot press and progressive press: Which one should our parts be manufactured with?」 This is ...
-
【Pallet Damage During Drum Transportation】Why Chemical Cargo Collapse Cannot Be Prevented by Load Arrangement Alone
When transporting heavy items such as drums, pallet damage is not always caused solely by the way th ...
-
【Containers Delayed After Arrival in Japan】Loose-Loaded Shipping from Thailand to Japan: The Cost Factors That Cannot Be Determined by Loading Efficiency Alone
When shipping from Thailand to Japan, one method is to load goods loosely without using pallets in o ...
-
3 Factors That Determine Hot Stamp Quality: Pressure, Heat, and Time ｜ The Core Process Variables That Must Be Kept in Balance
Even when the same Hot Stamp settings are used, the color, sharpness, or foil adhesion may change du ...
-
Surface Treatment for Hard-to-Print Materials: Why Ink Fails to Adhere and Peels Off on PP and PE
In manufacturing plants in Thailand producing automotive parts and medical devices, printing fa ...
