【Connector Terminal & Connector Pin Product List】Straight・Bent・Press-Fit｜Materials・Dimensions・Plating Specifications

Matsuda (Thailand) Co., Ltd. manufactures connector terminals and connector pins in a variety of shapes, including straight pins, L-bending pins, crank-bending pins, offset-bending pins, notched pins, and press-fit pins.
This page introduces representative product examples by shape, together with their materials, dimensions, and plating specifications. Please use this information to check whether there is a product example similar to the terminal or pin you are considering for production.

■ Straight Pins

For straight shapes, we have manufacturing experience with tapered, round, and tapered-tip products.

Straight Tapered Pin
Material：C2600W
Dimensions：0.64 × 13.25
Plating：Sn Reflow

Round Straight Pin
Material：SUS304W
Dimensions：Φ0.45 × 7.8
Plating：None

Header Pin with Tapered Tip
Material：C1100W
Dimensions：Φ1.4 / 0.83 × 8.3
Plating：Sn（post-plating）

Tapered Pin with Au Plating
Material：C2600W
Dimensions：0.5 × 19.9
Plating：Au

Round Straight Pin with Barrel Finishing
Material：C2700W
Dimensions：Φ1.5 × 5.0
Plating：None

■ L-Bending Pins

For L-bending shapes, we have manufacturing experience with tapered and double-notched products.

L-Bending Tapered Pin
Material：C2600W
Dimensions：0.64 × 11.75 × 5.0
Plating：Sn Reflow

L-Bending Double Notch Tapered Pin
Material：C2600W
Dimensions：0.64 × 12.04 × 7.75
Plating：Sn（post-plating）

■ Crank-Bending Pins

For crank-bending shapes, we have manufacturing experience with tapered and notched products.

Crank-Bending Tapered Pin
Material：C2600W
Dimensions：0.64 × 16.25 × 1.2
Plating：Sn Reflow

Crank-Bending Notch Tapered Pin
Material：C2600W
Dimensions：0.64 × 13.24 × 7.55
Plating：Sn（post-plating）

■ Offset-Bending Pins

We also handle offset-bending shapes.

Offset-Bending Tapered Pin
Material：C2600W
Dimensions：0.64 × 15.67 × 3.24
Plating：Sn Reflow

■ Press-Fit Pins and Other Shapes

In addition to straight and bent shapes, we also have manufacturing experience with press-fit configurations featuring notches and ribs.

Straight Star Notch Tapered Pin
Material：C2600W
Dimensions：0.64 × 16.4
Plating：Sn Reflow

Straight Press Fit Notch Rib Tapered Pin
Material：C2600W
Dimensions：0.64 × 16.4
Plating：Sn

Depending on the required shape and application, you can also consult us about terminals and pins combining features such as straight sections, bends, tapers, notches, and ribs.

■ Supported Wire Sizes, Materials, and Plating

The main ranges supported for header forming are as follows.

Wire sizes：Round wire Φ0.09～2.5mm / Square wire □0.09～2.5mm
Materials：Brass, copper alloys, phosphor bronze, stainless steel, Kovar, nickel-iron alloys
Plating：Tin, gold, silver, pre-plated materials

Even if the required shape differs from the product examples shown above, we can evaluate manufacturability by reviewing the wire size, material, shape, plating specifications, and other requirements. If you already have an existing drawing, you can consult us based on that drawing.

■ Frequently Asked Questions

Q1：Can you manufacture shapes other than straight pins？
A1：Yes. We have manufacturing experience with L-bending, crank-bending, offset-bending, notched, ribbed, and press-fit products.

Q2：What materials can you handle？
A2：We handle brass, copper alloys, phosphor bronze, stainless steel, Kovar, and nickel-iron alloys.

Q3：What types of plating can you handle？
A3：We handle tin, gold, and silver plating. We also support header forming using pre-plated materials.

Q4：Can I consult you if the dimensions or shape differ from the product examples？
A4：Yes. We evaluate manufacturability after reviewing the wire size, material, shape, plating specifications, and other requirements.

Q5：Can you handle press-fit shapes？
A5：Yes. We have manufacturing experience with press-fit pins featuring notches and ribs.

※For more details, please download the attached materials or contact us via the form below.