Compressed Volume Structure Tester (CVST) Thailand
Detail :
The CVST by HITEC Luxembourg is a void-volume tester, which is derived and further developed from the ASTM standard D6086 “Standard Test Method for Carbon Black – Void Volume (VV)” and compliant to the ASTM standard D7854 “Carbon Black – Void Volume at Mean Pressure”.
The void volume of a carbon black expressed as a function of mean pressure is a carbon black structure property. The greater a carbon black resists compression by having substantial aggregate irregularity and non-sphericity, the greater the compressed volume and void volume. Compressing carbon black powder breaks its agglomerates and aggregates to a similar extent as in the sample preparation for the compressed oil absorption COAN as per ASTM D3493. By measuring the decompression of the powder it is possible to derive a residual void-volume, which reflects well the COAN – this is naturally intuitive as it describes the powder in a similar physical condition (i.e. in uncompressed state after breaking agglomerates/aggregates).
With an exchangeable compression chamber, it is possible to optimize this new method for best testing conditions. Its control software, which is under constant evolution, can further determine other characteristic responses like material friction, work absorbed by compression/decompression, etc. The CVST by HITEC Luxembourg complies with the present requirements of standards on void-volume, but above all it allows to set up test methods and personalize configurations far beyond the requirements of the related ASTM method. The CVST can be used for the characterization of other powder materials (silica, ceramics, …)
Key features
♦ Two force sensors for applied and transmitted pressure
♦ Measurement of:
o Void volume vs. applied, transmitted & geometric mean press
o Residual void volume reflecting COAN structure
o Material friction losses (reflecting NSA/STSA surface)
o Electrical conductivity of carbon black
♦ Controlled compression and decompression
♦ Compatible with various porous materials (tested with carbon black, silica, and ceramics)
♦ Compact design
♦ Minimal maintenance
Safety
♦ CE marking
♦ SGS-USTC certified
Options
♦ Option 1/2 or 1 compression chambers
♦ 1” compression chamber for carbon black conductivity measurement
Dimension (L x W x H) 61 x 48 x 131 cm
Weight 150 kg
เครื่องวัด
CONTACT
การสอบถามเกี่ยวกับผลิตภัณฑ์ข้างต้นข้อมูลบริษัท
Punching Cutter / เครื่องทดสอบความแข็งของเม็ดพลา / Environmental Test chambers
CG Engineering เป็นผู้นำในการให้บริการแบบครบวงจรสำหรับเครื่องทดสอบในอุตสาหกรรมยางและพลาสติกในประเทศไทย