ISO series: Exceeds the requirement of ISO18752

ISO series: Exceeds the requirement of ISO18752・Application: Hydraulic oil・Inner Tube: Oil resistant synthetic rubber・Reinforcement: High-tensile steel wire・Outer Cover: High-Abrasion & weather-resistant synthetic rubber, MSHA approved・Operation temperature: Oil-based hydraulic fluid see below/ Wate ...

EN series: Exceeds the requirement of EN856/ISO3862

EN series: Exceeds the requirement of EN856/ISO3862・Application: Hydraulic oil・Inner Tube: Oil resistant synthetic rubber・Reinforcement: High-tensile steel wire・Outer Cover: High-Abrasion & weather-resistant synthetic rubber, MSHA approved

SAE/EN series: Exceeds the requirement of SAEJ517/EN853

SAE/EN series: Exceeds the requirement of SAEJ517/EN853・Application: Hydraulic oil・Inner Tube: Oil resistant synthetic rubber・Reinforcement: High-tensile steel wire・Outer Cover: Abrasion & weather-resistant synthetic rubber

LHW for Heat resistence

・FeatureAs a result of improvement of the quality of the inside and outside rubbers, the heat resistance performance was much improved. The maximum temperature for the use of the HW series now reaches at 150˚C.The life expectancy of the HW series has been also improved at the 120˚C.・Constructionlnne ...

HTW10 Water and hot water (not available for use with oil)

・FeatureOnly insert a hose into a fitting and then you can use the assembly.No need for band tightening or clamping. Usable with up to 120˚C hot water.・ConstructionInner Tube : Heat-resistant synthetic rubberReinforcement : Special synthetic fiberOuter Cover : Heat-resistant synthetic rubber・Applica ...

MID OIL, MID OIL-E For Hydraulic oil

・ApplicationHydraulic oil(Not for hot water)・Operating Temperature-40˚C to +80˚C・Minimum Coil Length100m/coil※ MID OIL-E : static wire seriesI/D 19~50mm, 1.0Mpa

COLOR FLEX For Air, Water

・ApplicationAir, Water・Operating Temperature-30˚C to +60˚C・Minimum Coil Length100m/coil

WS18Z Quick and easy assembly

・FeatureQuick and easy assembly: Only cut a hose to the required length and insert fitting (WS18 Stockless Reusable fitting) after lubricating it.Special hose insertion tool is available.)Fittings can be reusable. All fittings are reusable. Even if a hose is damaged, the metal fittings can be reused ...

SAE 100R6 (L35)

・FeatureLight weighty and flexible hose for low-mid pressure range passed ISO4079-R6, SAE100R6.Easy to assembly by field crimp machine.・Constructionlnner Tube : Oil resistance synthetic rubber.Reinforcement : Wire braid, Spiral Wire braid.Outer Cover : Weather-resistant synthetic rubber.・Application ...