PRODUCT
Production Goods
SHM61 Compliance Module / Multi-Directional Compensation with Locking Mechanism / Helps Absorb Position Misalignment in Gripping and Assembly Applications
In gripping and assembly applications, the position of a part may not align perfectly with the gripper or assembly point every time. If the equipment cannot move to accommodate these small deviations, insertion and assembly operations may become more difficult.
KOGANEI (THAILAND) CO., LTD. offers the SHM61 Compliance Module, designed to absorb positional misalignment while incorporating a locking mechanism in a single compact unit.
The SHM61 supports movement in multiple directions and uses pneumatic pressure to return to and lock at a reference position. Its compact design, responsive movement, and repeatable locked position make it suitable for applications where the gripper needs to follow the actual workpiece position before proceeding to assembly or the next process.
Contents
- How the SHM61 Helps Absorb Positional Misalignment
- Position Compensation Mechanism and Pneumatic Locking
- Multi-Directional Movement in a Single Module
- Selecting SHM61S, SHM61M, or SHM61L for Your Application
- Key Points to Check Before Using the SHM61
- Frequently Asked Questions
How the SHM61 Helps Absorb Positional Misalignment
The SHM61 provides a controlled amount of movement between the gripper and the workpiece, helping absorb small positional differences during each operating cycle.

- Position compensation: The mounting plate can move slightly in specified directions
- Follows workpiece misalignment: Helps absorb positional differences before gripping or assembly
- Built-in locking mechanism: Uses pneumatic pressure to return to and lock at the reference position
Inside the SHM61, plates, a frame, springs, and motion-control components work together. In the unlocked state, the upper plate can move within a specified range to follow the actual position of the workpiece.
This design reduces the need for the gripper and workpiece to be perfectly aligned from the start.
However, the amount of compensation is limited by the product specifications, so the machine and workpiece positioning should be designed so that actual misalignment remains within the allowable movement range of the SHM61.
Position Compensation Mechanism and Pneumatic Locking
The locking mechanism allows the module to switch from a flexible state for absorbing misalignment to a defined reference position for the next process.
- Pneumatic locking: Operating pressure range is 0.2–0.6 MPa
- Locks at the reference position: The internal plate is pressed against positioning balls
- Repeatability in the locked position: ±0.02 mm
When compressed air is supplied, the internal plate is pushed downward and guided by positioning balls back to the reference position before entering the locked state.

This allows the SHM61 to switch between an unlocked compensation state and a locked reference state using pneumatic control.
The operating pressure range for all models is 0.2–0.6 MPa, with a maximum proof pressure of 1 MPa. The operating medium is air, and no additional lubrication is required.
This makes the SHM61 suitable for applications where the gripper needs flexibility while approaching the workpiece, while still requiring a repeatable reference position for the next process.
Multi-Directional Movement in a Single Module
The SHM61 supports planar misalignment as well as small differences in height and angle.
- X and Y axes: Supports planar displacement of ±1.0 mm
- θ angle: Supports rotational misalignment of ±2.5°
- α angle: Supports tilt of ±0.6°
In addition to movement in the X and Y directions, the SHM61 also allows movement in the Z direction and supports angular displacement. This means it can absorb more than simple left-right or front-back misalignment.
This is particularly useful in assembly applications where the workpiece may have slight variations not only in position, but also in height or angle. The module can move within its specified range before switching to the locked state.
Because the allowable compensation range is limited by the product specifications, the actual amount of workpiece and machine misalignment should be confirmed before selecting the SHM61.
Selecting SHM61S, SHM61M, or SHM61L for Your Application
The SHM61 is available in three main sizes, differing in mounting dimensions, allowable workpiece weight, and module weight.
Item | SHM61S | SHM61M | SHM61L |
Mounting Size | S | M | L |
Mounting Pitch | 50 mm | 65 mm | 85 mm |
Maximum Workpiece Weight | 1.5 kg | 3 kg | 4.5 kg |
Module Weight | 200 g | 420 g | 600 g |
- SHM61S: Suitable for compact grippers and equipment, supporting workpieces up to 1.5 kg
- SHM61M: Supports workpieces up to 3 kg
- SHM61L: Suitable for larger grippers and equipment, supporting workpieces up to 4.5 kg
The main operating pressure and movement specifications are common across the series, while mounting dimensions and allowable workpiece weight differ by model.
This makes it easier to select the appropriate model based on workpiece weight and available installation space.
For detailed external dimensions, mounting positions, and mounting hole information for each model, please download the PDF attached to this article or contact KOGANEI (THAILAND) CO., LTD. through the inquiry form.
Key Points to Check Before Using the SHM61
When selecting the SHM61, consider the workpiece weight, expected positional deviation, and the machine's pneumatic conditions together.
- Check the workpiece weight: Select a model that supports the load within its specified limit
- Check the amount of misalignment: The deviation must remain within the SHM61 movement range
- Prepare the pneumatic system: Use within the operating pressure range of 0.2–0.6 MPa
The operating temperature range of the SHM61 is 0–60°C. Before use, check the installation environment together with the pneumatic pressure and workpiece weight.
The module does not require lubrication during normal operation, helping simplify pneumatic system preparation. However, it should still be installed and used within the specified conditions to maintain stable movement and repeatability in the locked position.
The upper and lower plates of the SHM61 include positioning and mounting features. Because mounting dimensions differ among the S, M, and L sizes, compatibility with the gripper and surrounding equipment should be checked in advance.
Frequently Asked Questions
Q: In which directions can the SHM61 compensate for positional misalignment?
A: It supports movement in the X, Y, and Z directions, as well as rotation in θ and tilt in α, allowing one module to absorb misalignment in multiple directions.
Q: What are the differences between SHM61S, SHM61M, and SHM61L?
A: The main differences are mounting size, module weight, and maximum workpiece weight. The maximum supported workpiece weights are 1.5 kg, 3 kg, and 4.5 kg respectively.
Q: What pneumatic pressure is required for the SHM61 locking mechanism?
A: The operating pressure range is 0.2–0.6 MPa. When air is supplied, the internal mechanism returns to the reference position and locks in place.
Interested in the SHM61 Compliance Module?
The SHM61 combines multi-directional compliance with a pneumatic locking mechanism to improve flexibility in gripping and assembly applications.
It is available in three sizes—SHM61S, SHM61M, and SHM61L—allowing selection according to workpiece weight and available installation space.
For more detailed product information, please download the PDF attached to this article or contact KOGANEI (THAILAND) CO., LTD. through the inquiry form below.
Company Information
pneumatic equipment / electric-operated devices / electrostatic elimination equipment
KOGANEI (THAILAND) CO., LTD. operates in Thailand under KOGANEI Corporation, Japan, providing Pneumatic and Integrated Automation Solutions for industrial applications. Established in Thailand in 2006 ...
CONTACT
Contact