COMPLIANCE LIGHT Position Compensation Unit / Position Compensation with Pneumatic Locking / Suitable for Gripping, Assembly, and Workpiece Transfer

COMPLIANCE LIGHT Position Compensation Unit / Position Compensation with Pneumatic Locking / Suitable for Gripping, Assembly, and Workpiece Transfer

In automated systems, the position of a workpiece does not always align perfectly with the gripper or assembly point. If the equipment cannot accommodate these small positional deviations, insertion, press-fitting, assembly, or gripping operations may become more difficult.

KOGANEI (THAILAND) CO., LTD. offers COMPLIANCE LIGHT, a position compensation unit designed to absorb positional differences between the workpiece and the gripper or assembly equipment, allowing the system to operate more flexibly.

COMPLIANCE LIGHT is available in both Parallel Type and Swing Type configurations. In addition to standard models, the lineup includes versions with increased holding force, clean system specifications, space-saving mounting options, and models that can retain the compensated position after gripping.

It is suitable for integration with robot hands and automated transfer systems.

Contents

  • How COMPLIANCE LIGHT Helps When Workpiece Position Is Misaligned
  • Choosing Parallel Type or Swing Type According to the Misalignment
  • Selecting the Right Specification from Standard Applications to Clean Systems
  • Locking the Position After Gripping for Stable Transfer
  • Key Points to Check Before Selecting COMPLIANCE LIGHT
  • Frequently Asked Questions

How COMPLIANCE LIGHT Helps When Workpiece Position Is Misaligned

COMPLIANCE LIGHT allows the gripper or assembly unit to move according to the actual workpiece position before locking and proceeding to the next process.

  • Compensates for positional deviation: Helps reduce the effect of misalignment between the workpiece and the gripper or assembly position
  • Moves with the workpiece when unlocked: When air is not supplied, the unit can move to absorb positional differences
  • Locks with pneumatic pressure: When air is supplied, the internal mechanism holds the position according to the selected model

For example, during an insertion process, if the workpiece is slightly offset from the assembly position, COMPLIANCE LIGHT can move in the specified directions to absorb the deviation and help guide the workpiece into position before switching to the locked state for the next step.

Models with centering force attempt to return to the center position with approximately 3–5 N of force when displaced by 0.5 mm. Versions without centering force are also available for applications where this restoring force is not required.

The unit is designed to be lightweight, making it suitable for mounting on robot hands and for gripping and transfer applications involving repeated motion cycles.

CPL 1_4f673b09-ba3e-45f0-ba18-3dd203ce2e28.jpg

Choosing Parallel Type or Swing Type According to the Misalignment

The main difference between the two types is the direction in which the unit can move to compensate for positional error.

Type

Compensation Directions

Typical Applications

Parallel Type

CPL ขนาน_9cd82a50-905d-41ae-baff-7d4250e16f21.png

X・Y・θ

Insertion, press-fitting, assembly, and planar misalignment compensation

Swing Type

CPL Swing_37041c58-4c21-4c94-a46c-159d2f56e78a.jpg

X・Y・Z・θ・α

Applications involving position, height, and angular misalignment

The Parallel Type is suitable when the workpiece may be offset left-right, front-back, or by a small rotational angle. It can also be used as a compliant support during press-fitting and assembly operations.

The Swing Type adds movement in the Z direction and tilt angle α. This allows it to handle not only planar positional deviations, but also differences in height and inclination.

For Z-axis movement, the Swing Type uses a spring-assisted mechanism, providing additional flexibility in insertion or assembly applications where workpiece height varies slightly.

Selecting the Right Specification from Standard Applications to Clean Systems

COMPLIANCE LIGHT is available in multiple configurations to suit different transfer methods, operating environments, and installation spaces.

Type

Key Features

Standard Type (CPL-F / CPL-S)

Position compensation using Parallel or Swing motion

Clean System Type (CS-CPL-F / S)

Designed for clean system applications

Reinforced Retaining Type (CPLH-F / S)

Increased position holding force

Direct Mounting Type (CPLHB-F / S)

Reinforced retaining type designed for direct mounting to the MJC Series automatic tool changer

Arbitrary Position Lock Type (CPLHA-F)

Locks and retains the compensated position during transfer

Lateral Direction Type (CPLHV-F)

Supports lateral position compensation with a lateral retaining mechanism

The reinforced retaining type provides more than twice the holding force of the standard type when pressurized, making it suitable for robot systems and transfer applications that require higher holding force.

For applications requiring cleanliness control, the Clean System Type includes a particle suction port and uses grease suitable for clean systems. Under specified evaluation conditions, it supports cleanliness equivalent to Class 5 or FED-STD Class 100.

Where installation space around the unit is limited, a direct piping configuration allows air to be supplied through the mounting interface, reducing the space required for side-mounted fittings and tubing.

Locking the Position After Gripping for Stable Transfer

COMPLIANCE LIGHT offers several locking methods, allowing the system to be selected according to the gripping and transfer sequence of the machine.

  • Center-position locking: Air pressure is supplied to hold the unit at the center position
  • Locking the compensated position: CPLHA□F can retain the position reached after following the workpiece
  • Support for lateral mounting: CPLHV□F helps reduce displacement caused by the weight of the gripper when used horizontally

Standard models use pneumatic pressure to hold the unit at the center position.

In contrast, the Arbitrary Position Lock Type CPLHA□F can follow the actual workpiece position, grip the workpiece, and then lock that compensated position by supplying air.

This is useful for applications where the system needs to grip a workpiece at an offset position and maintain that relative position during transfer, without immediately forcing the gripper back to the center.

The Lateral Direction Type CPLHV□F uses an internal support mechanism from four directions to help reduce displacement caused by its own weight when the robot hand is positioned sideways.

Before selecting a model, it is therefore important to determine whether the application only requires locking at the center position or whether it must retain the actual compensated position after gripping.

Key Points to Check Before Selecting COMPLIANCE LIGHT

Model selection should begin with the required compensation directions, the total load of the gripper and workpiece, and the motion characteristics of the machine.

  • Check the required compensation directions: Choose Parallel Type for X・Y・θ, or Swing Type for X・Y・Z・θ・α
  • Check the transfer load: Main sizes support maximum loads from 1 to 6 kg depending on the model
  • Check the motion conditions: Consider special versions for high-speed motion, lateral installation, or clean environments

The main COMPLIANCE LIGHT sizes are □34, □54, □70, and □90 mm. Depending on size, standard models support maximum loads of 1 kg, 2 kg, 4 kg, and 6 kg.

When selecting a model, consider not only the workpiece weight, but also the weight of the gripper and any peripheral devices mounted together with it.

If the unit is installed on a robot that accelerates or stops rapidly, the effect of inertia should also be considered. Sudden impact stops may affect holding performance and positioning accuracy.

Use clean compressed air and install an air filter rated at 40 μm or finer near the product. This helps reduce contamination and liquid ingress that could interfere with operation.

※ For detailed compensation ranges, holding force, allowable load, and model codes for each specification, please download the PDF attached to this article or contact KOGANEI (THAILAND) CO., LTD. through the inquiry form.

Frequently Asked Questions

Q: What problems does COMPLIANCE LIGHT help solve in automated systems?
A: It helps absorb small positional differences between the workpiece and the gripper or assembly point, making insertion, press-fitting, assembly, and gripping operations more flexible.

Q: Should I choose the Parallel Type or the Swing Type?
A: Choose the Parallel Type when compensation is required in X・Y・θ directions. If height and angular deviations also need to be absorbed, consider the Swing Type, which adds Z and α movement.

Q: Can every model lock the compensated position?
A: No. Standard models lock at the center position. Retaining the compensated position is a feature of the Arbitrary Position Lock Type.

Q: Which model is suitable for horizontal robot-hand installation?
A: The Parallel Type includes the CPLHV□F model for lateral installation. It is designed to reduce displacement caused by its own weight when used sideways.

Interested in COMPLIANCE LIGHT?

COMPLIANCE LIGHT helps gripping, assembly, and transfer systems accommodate workpiece position variations more flexibly.

The lineup includes Parallel Type, Swing Type, Reinforced Retaining Type, Clean System Type, Arbitrary Position Lock Type, and models designed for lateral installation.

For more detailed product information, please download the PDF attached to this article or contact KOGANEI (THAILAND) CO., LTD. through the inquiry form below.

Company Information

KOGANEI (THAILAND) CO., LTD.

Main 3 Products

pneumatic equipment / electric-operated devices / electrostatic elimination equipment

Homepage URL

Display URL

KOGANEI (THAILAND) CO., LTD. operates in Thailand under KOGANEI Corporation, Japan, providing Pneumatic and Integrated Automation Solutions for industrial applications. Established in Thailand in 2006 ...

CONTACT

Contact

This is the inquiry form for KOGANEI (THAILAND) CO., LTD.. Please enter your inquiry details.

This service is intended for consulting on processing projects and requesting quotes.
Please do not use it for company PR or sales activities.
If we receive complaints about the content sent, we may take measures such as forcibly suspending usage.

Name*Required
Company Name*Required
Department
Position
Email Address*Required
Phone Number*Required
Inquiry Type*Required
Inquiry Content*Required
Attach File

Only files with extensions of images (jpeg, jpg, gif, png, pdf) and compressed files (zip, lzh) are valid. Maximum file size 10MB