Silicone Adhesive Remover eSolve21RS ／ Chlorine-free & Non-hazardous Formula ／ Eco-compliant Industrial Stripper

KANEKO CHEMICAL (THAILAND) CO., LTD. supplies E-Solve 21RS in Thailand. Available in 1 kg packaging, this product supports the dissolution of silicone resin, silicone rubber, and polyamide or nylon for cleaning and workpiece repair.

Table of Contents

• Features of E-Solve 21RS

• Specifications and Packaging

• Usage and Precautions

• Industrial Applications

• Frequently Asked Questions (FAQ)

Features of E-Solve 21RS

E-Solve 21RS is a specialized solvent developed to remove and dissolve silicone resin and nylon. Its technical characteristics include:

• Cleaning Efficiency: Dissolves silicone resin, silicone rubber, and nylon easily through simple immersion.

• Chlorine-free: The product contains no chlorinated solvents.

• No Flash Point: It has no flash point and is not classified under flammable substance control laws.

• Eco-friendly: Features an Ozone Depletion Potential (ODP) of 0.013 and a Global Warming Potential (GWP) of 0.0001.

Specifications and Packaging

Physical details and packaging for E-Solve 21RS are as follows:

For more details, please download the attached PDF or contact us via the form below.

Usage and Precautions

To ensure maximum efficiency and safety standards, the following steps should be observed:

1. Immersion: Immerse the workpiece in E-Solve 21RS solution (applying heat can further improve dissolution efficiency).

2. Inspection & Rinsing: Due to its acidic nature, workpieces must be thoroughly rinsed after use with e-Clean 21RSN or alcohol.

3. Precautions: The solvent may react strongly with certain metals, such as aluminum and magnesium. Therefore, a small-scale test should be performed before full application.

Industrial Applications

E-Solve 21RS is suitable for manufacturing and repair processes in various sectors:

• Dissolving silicone seals or silicone adhesives used for component bonding.

• Cleaning silicone mixing tanks and removing stubborn hardened residues.

• Dissolving silicone coatings or stripping cured silicone lubricants.

• Surface smoothing for parts produced by 3D printers.

Frequently Asked Questions (FAQ)

Q: Can E-Solve 21RS dissolve fully cured silicone?
A: Yes, this product is technically designed to dissolve and strip cured silicone through an immersion process.

Q: Does this product contain hazardous chlorinated chemicals?
A: No, E-Solve 21RS is a chlorine-free solvent with no flash point, making it safe for industrial use.

Q: Can E-Solve 21RS be used on all types of workpieces?
A: The product is acidic and may react strongly with certain metals, such as aluminum and magnesium. It is recommended to perform a material compatibility test before use.

For more details, please download the attached PDF or contact us via the form below.